Spa OxyChock is used for efficient chlorine-free shock disinfection of bath water in indoor and outdoor pools and Spa baths.
Instructions for use: Always adjust the bath water pH value to 7.0–7.4 first. Here the bath water is experienced as most comfortable and Activ Spa OxyChock disinfects optimally. The ideal content of Active Spa OxyChock is 5-8 ppm (mg / l). Measurement should be performed 1-2 hours after addition.
Dosage:
When refilling: Add 20 g of Spa OxyChock per 1,000 liters of bath water. Each time the spa has been used, 20 g of Spa OxyChock is added. It is possible to bathe again approx. 4 hours after a shock treatment. When disinfecting in connection with maintenance without bath, the dosage is 20–40 g per week per 1,000 liters of bath water. You should dissolve Spa OxyChock in a clean plastic container with water. First add the water. The solution is poured into the spa water while the circulation pump is running. Alternatively, Spa OxyChock can be gently sprinkled into the spa water in front of the nozzles, provided the circulation pump is running. Allow the circulation to run for at least 20 minutes after the granulate has been added. Use biocidal products safely. First read the label and product information.
