Spa chlorine granules 56% are used for efficient disinfection of the bath water in indoor and outdoor Spa baths and pools
Instructions for use: Always adjust the bath water pH value to 7.0–7.4 first. Here the bath water is experienced as most comfortable and the Activ Spa chlorine granulate optimally disinfects.
Dosage:
When refilling: Add 9 g of SPA chlorine granules per 1,000 liters of bath water. The bath water should then be measured regularly and the chlorine content should be kept between 2–5 ppm (mg / l). You should dissolve the Spa chlorine granulate in a clean plastic container with water. First add the water. The solution is poured into the spa water while the circulation pump is running. Alternatively, the Spa chlorine granulate can be gently sprinkled into the spa water in front of the nozzles, provided the circulation pump is run. Allow the circulation to run for at least 20 minutes after the granulate has been added.
Warning: Mixing different chlorine products can cause severe reactions and explosions! Never mix with other chemicals! Use biocidal products safely. First read the label and product information.