Pool water that is out of balance can e.g. irritate the eyes and skin. When the water is hard, with a high pH count exceeding 7.4, Active Pool PH Down should be added. If the water has a low pH count below 7.0, Active Pool PH Up should be added. The chlorine level can be continuously tested with Active Pool pH and Chlorine Pooltester.
Dosage:
150 g. Active Pool PH Down to reduce the pH count by 0.2 per 10,000 l.
100 g. Active Pool PH Up to raise the pH count by 0.2 per 10,000 l.
The shock treatment is given when the pool has just been filled, or if there is a specific problem, such as deposits or opaque and unclear water. A higher dose of disinfectant than normal is added to the water, for effective disinfection.
Dosage:
75 g. Activ Pool Chlorine Quick granulate per 10,000 l
50-80 g. Activ Pool Chlorine SuperShock per 10,000 l
200 g. Activ Pool Oxy PoolShock per 10,000 l.
Pools with high activity are kept disinfected by a chlorine content of 1-3 mg/l. Pools with normal activity are kept disinfected by a chlorine content of 0.5-1.0 mg/l. The chlorine level can be continuously tested with Active Pool pH and Chlorine Pooltester.
Dosage:
Active Pool Chlorine LongTabs 20g 5 tablets per 10,000 l.
Active Pool Chlorine LongTabs 200g 1 tablet per 20,000 l.
Microbe spores are carried in the air and get into every pool – including indoor swimming pools. Hot weather, heavy rain and high pool activity also affect the levels of deposits. Deposits can be prevented with Pool Protector, which also removed microbes suspended in the pool water, keeping it clear and inviting. Compatible with both chlorine and acid.
Activ Pool Pool Protector
Start: 1.0 dl per 10,000 l.
Preventive: Weekly 0.5 dl per 10,000 l.
Sand filters can only remove particles down to a certain size. The smallest particles that are not caught by the sand filter can form a mist in the pool water, giving it an unattractive, opaque haze. To catch the smallest particles, a flocculant can be added. It binds the smallest particles into larger grains that can be captured by the pool's sand filter.
Activ Pool Flocking Liquid
Adjust the pH count to 7.2
Start: 50-100 ml to 10,000 l.
Preventive: 0.5 dl per 10,000 l per week
To keep the pool water fresh and inviting, chemical care products are not enough. Effective filtration of the water via the pump system is also necessary, just as the physical impurities in the pool must be removed. Removing visible impurities reduces the need for chemical care of the pool water, and also limits the wear on the pool's filter system.
